Airbrush System

Copic Air Can Holder

$ 7.50

A square foam base that keeps your ABS air cans from tipping over during use. Three holes for Air Can 180, D60 and Air Adaptor. Replaces ABS1-N Air Can Holder. Measures 4 3/8" square x 1 5/8" h. 


addcart cart

Copic Air Can D-60

$ 12.99

Replacement for the ABS-2 air can. The small Air Can D60 gives you 7-8 minutes of use. This portable unit requires only the Air Grip to work. Great for your backpack, occasional desktop airbrush touches, or if you want to try out the ABS to see if it is right for you. 


addcart cart

Copic Air Can 180

$ 19.99

Air Can 180 provides 40-45 minutes of airbrush use providing a smaller, desktop alternative to using a full air compressor. Must be used with the Copic 1/4" to1/8" (NOT for compressor), Air Hose, with the Air Adaptor, and with the Air Grip.

Note: The Air Can 180 is not directly compatible with the Air Grip. You must use the Air Adaptor.


addcart cart

Copic Air Adaptor

$ 19.99

Replacement Air Adaptor for use with Copic Airbrush Systems. 

The Air Adaptor is required for use with either the Copic Air Can 180 or a compressor as it regulates air pressure. An air grip is needed when using the Air Adaptor. The Air Adaptor is included when you buy the ABS1-N kit and ABS3 kit.


addcart cart

Copic Air Grip

$ 26.50

Replacement Air Grip for Copic Airbrush System. Works with Classic or Sketch markers only. Can be attached to Air Can 180 or Air Can D60, or for use with Air Adaptor and a compressor.


addcart cart

Copic Air Hose 1/8 to 1/8 for Compressor

$ 31.99

Replacement airbrush hose for working with an air compressor. Not for use with Copic Air Cans. 1/8" to 1/8" connection. Measures approx. 80 inches in length. For ABS1-N replacement see the 1/4" to 1/8" hose. 


addcart cart

Air Hose 1/4 to 1/8- Compressor

$ 31.99 Out of Stock

Replacement airbrush hose for working with an air compressor. Not for use with Copic Air Cans. 1/4" to 1/8" connection. Measures approx. 10 feet in length. For ABS1-N replacement see the 1/4" to 1/8" hose, AH4-8.


deletecart cart

Airbrush Starting Set ABS-2

$ 36.99

The ABS-2 kit is a great introduction to the Copic Airbrush System. This kit is totally self contained and ready to go right out of the box. Just add your Classic or Sketch marker (sold separately) and get to work. It includes the Air Grip and the Air Can D60. The small Air Can D60 gives  you 7-8 minutes of use. Great for on-the-go artists or as a simple addition to your desktop workspace. Replace the Air Can D60 itself or move up to the larger Air Can 180 and 1/4" to 1/8" Hose for longer use. 


addcart cart

Copic Air Hose 1/4 to 1/8

$ 37.99

Replacement hose for the ABS1-N kit. This hose works only between the Air Can 180 and the Air Adaptor. Measures approx. 40 inches in length. For working with an air compressor, please see Air Hose 1/4 to 1/8-Compressor. 


addcart cart

Airbrush Starting Set ABS-3

$ 43.99

The Copic ABS-3 kit includes:
  • Air Grip
  • Air Adaptor
This kit is meant for use with the Air Can 180 or an air compressor. This kit is ideal if you already own an air compressor or as a replacement for ABS1-N parts.
Please note that this kit requires the 1/4" to 1/8" hose for use with the Air Can 180, and a 1/4" to 1/8" for use with an air compressor.  Each compressor uses a different sized hose, so check the diameter carefully before purchasing a new hose or adaptor.  Copic airbrush supplies are a standard 1/8” Iwata or Sparmax fitting.

addcart cart